Skip to main content

How to lay table cloth

1) The table on which a tablecloth is to be spread, should be first covered with a baize base cloth, for the following reasons

a. To protect the diner's wrists and elbows from the table’s sharp edges.

b. To keep the tablecloth firmly in place.

c. To protect the surface of the table and prevent the rattling of crockery and cutlery.

d. To absorb moisture in case liquid spills on the table.

2) Based on the size of the table, appropriate linen should be used. The central fold of the tablecloth should be in the middle of the table and all the four edges should just brush the seats of the chairs. Soiled or torn linen should not be used. Three types of tablecloths namely cotton, linen and damask are used. Of these, damask is the best.

3) If a bud vase is used as a central decorative piece, it should not be very large or tall as that obstructs the view of guests sitting opposite each other. Heavily scented flowers should be avoided, as they affect the flavour of the food.

4) Each cover should be well-balanced. (A cover is the space required on a table for laying cutlery, crockery, glassware and linen for one person to partake of a meal).

5) Only the required cutlery, crockery and glassware should be placed on the table. On a normal dining table, the space required for one cover is 60 cm x 38 cm. The cover on the opposite side should be exactly similar, so as to give a well balanced look.

6) Cutlery should always be laid from the inside to the outside of the cover, since the order of sequence in which they are to be used is always from outside to inside.

7) Knives and soup spoons should be placed on the right-hand side of a cover, while forks should be placed on the left-hand side. Dessert spoons and forks should be placed on top of the cover. The side knife should be placed on a quarter plate and kept on the left side of the cover. The cutting edge of all knives should face to the left.

8) Water tumbler should be kept to the right of the cover, at the tip of the large knife.

9) Napkins should be placed in the centre of the cover, in between the cutlery. Normally during a dinner session, napkins are arranged in empty water tumblers.

10) Cruet sets a butter dish, an ashtray, meal accompaniments and a bud vase should be placed in between the covers at the centre of the table.

11) Crockery and cutlery should be spotlessly clean and the glassware well polished.

12) Chipped or cracked equipment should not be used. The hotel's monogram should be visible to the guest.

13) All cutlery and crockery should be placed about an inch from the edge of the table so that they are not accidentally tipped over.




table cloth laying

table cloth laying 2

http://news.chivindo.com/433/how-to-lay-table-cloth.html

Comments

  1. Really Nice Post!!!keep us updated!!
    If you want a cool looking Table cloth then Must have a look!!!

    ReplyDelete

Post a Comment

Popular posts from this blog

BT-BASIC commands used

8.10     Some of the most frequently used BT-BASIC commands used are: msi                               Changes default working directory. Mass storage is            Same as “msi” cat                               Catalogs (list)the node names in the specified directory.             get                               Brings the contents of a file into the system workspace.             load                             Same as “get”.             msi$                            Returns the directory pathname of the current working directory.             msi “..”                       Backs up one directory level.             findn                            Locates the next occurrence of the a given sting in the workspace. 8.11           If you wish to invoke the HP Board Graphics Viewer, type board graphics at the BT-BASIC command line and press the “ENTER” key on the keyboard. 8.12           A HP Board Graphics Viewer window should now appear

Perhitungan & Cara Merubah Kumparan Blender Dari 220 V Menjadi 12 V

          Seperti yang telah dijelaskan pada buku “menggulung motor listrik arus bolak-balik, servis peralatan listrik rumah tangga kelompok penggerak dan perbaikan peralatan listrik pertukangan”, bahwa motor penggerak yang digunakan pada perlatan listrik rumah tangga dan pertukangan seperti blender, mixer, bor tembak, gerinda dsb menggunakan jenis motor universal. Motor universal adalah jenis motor listrik yang dapat disuplai dengan sumber listrik arus bolak-balik (AC) dan arus searah (DC). Jadi peralatan-peralatan listrik rumah tangga dan pertukangan tersebut yang biasanya kita suplai dengan sumber listrik AC dari PLN atau Genset sebesar 220 V sebenarnya dapat juga kita suplai dengan sumber listrik DC yang tentunya tegangan juga harus sama yakni 220 V.           Yang menjadi permasalahan bagaimana kalau peralatan listrik rumah tangga atau pertukangan tersebut, sebagai contoh misalkan blender yang ingin digunakan atau dioperasikan pada tempat yang tidak terdapat sumber listrik PLN ata

BT-BASIC command line

8.8       At the BT-BASIC command line type the command  msi  and the directory path, then press the “ENTER” key on the keyboard.  Example:                   msi ‘/hp3070/boards/aspect/main’ 8.9       At the BT-BASIC command line type the command  get ‘testplan’ and press the   ENTER” key on the keyboard.  You should now see the body of the testplan file displayed in the work space of the BT-BASIC window. 8.10     Some of the most frequently used BT-BASIC commands used are:

Autodesk SketchBook Pro 2021 Full Version

BAGAS31 – Sesuai dengan namanya, Autodesk SketchBook Pro 2021 Full Version ini merupakan software digital sketching atau drawing terbaik yang bisa kamu gunakan. Pada versi terbaru kali ini, ada beberapa penambahan fitur yang sangat efektif. Dengan fitur baru tersebut, diharapkan mampu meningkatkan proses sketching maupun drawing kamu. Autodesk SketchBook sendiri sudah bisa kamu dapatkan secara gratis melalui website resminya. Namun untuk kamu yang mau download versi Autodesk Sketchbook Pro, maka bisa langsung download melalui link yang sudah saya sediakan di bawah ini. Download Autodesk SketchBook Pro 2021 Full Version Screenshot: System Requirements: Windows 10 2.5 – 2.9 GHz of Intel or AMD CPU 4 GB of Memory 256 MB Graphics card with OpenGL 2.0 support We recommend that you use a pressure-sensitive tablet and pen for basic features Download: Autodesk SketchBook Pro 2021 Full Version [ FileUp ][ Uptobox ][ UsersDrive ] Jamu Only [ FileUp ][ Uptob

Testhead

4.3         Testhead The testhead is that portion of the tester that supports the PIN, ASRU and Controller cards.   The testhead is divided into two BANKS and each BANK is divided into two MODULES, see figure 2 below.  Bank 1 contains modules 0 and 1, bank 2 contains modules 2 and 3.  The test fixtures are placed on the banks of the tester and locked down for board testing.  The testhead cards interface to the test fixture through the spring loaded pogo pin “nails” at the top edge on each of these card types. 4.4       Support Bay The support bay is a stand-alone cabinet that houses the power supplies for the Unit Under Test.  This bay also houses the test station power distribution unit and test station controller on earlier models. 4.5       Emergency Shutdown Switch The emergency shutdown switch is the large red button located at the lower left corner on the front of the testhead.  It turns off all AC power to the testhead, and is equivalent to turning off the m

Kelebihan dan Kekurangan Saluran Listrik Jenis Saluran Udara dan Saluran Bawah Tanah

Berdasarkan pemasangannya,   saluran distribusi dibagi menjadi dua kategori, yaitu : saluran udara (overhead line) merupakan sistem penyaluran tenaga listrik melalui kawat penghantar yang ditompang pada tiang listrik. Sedangkan saluran bawah tanah (underground cable) merupakan sistem penyaluran tenaga listrik melalui kabel-kabel yang ditanamkan di dalam tanah. 1.    Saluran Bawah Tanah (Underground Lines) Saluran distribusi yang menyalurkan energi listrik melalui kabel yang ditanam didalam tanah. Kategori saluran distribusi seperti ini adalah yang favorite untuk pemasangan di dalam kota, karena berada didalam tanah, maka tidak mengganggu keindahan kota dan juga tidak mudah terjadi gangguan akibat kondisi cuaca atau kondisi alam. Namun juga memilik kekurangan, yaitu mahalnya biaya investasi dan sulitnya menentukan titik gangguan dan perbaikannya. Kedua cara penyaluran memiliki keuntungan dan kerugian masing-masing. Keuntungan yang dapat diperoleh dari suatu jaringan bawah tanah adalah